Micromold Products, Inc
(914)969-2850                                   Contact Us
 | 
Deutsch
 | 
Français
 | 
Español
 | 
中文
 | 
日本語
 
Search Catalog
        
 Product Index    FF Series Filler Flanges/Compensation Rings
Product Index > Spacers, Flanges & Gaskets > Spacers & Flanges – PTFE, PVDF, PPL, CPVC > FF Series Filler Flanges/Compensation Rings > View Items  

FF Series Filler Flanges/Compensation Rings

 
Check up to five results to perform an action.


FF Series Filler Flanges/Compensation Rings

Standard Class 150 (150 lb.) PTFE Filler Flanges/Compensation Rings

Filler Flanges, also known as Compensation Rings, are used to connect flanges with raised faces or sealing surfaces-especially those of plastic lined steel pipe-to flat faced plastic flanges. Without filler flanges, when the bolts are tightened on such a joint, the plastic flange will, most likely, break. The filler flange fills the gap that lies between the OD of the raised surface and the OD of the flange, flattening the face in contact with the plastic flange.

Base Part Number: As shown here, the BASE PART NUMBER defines the Series (two characters), the material (one character), the nominal size, and the thickness TH. Use a decimal number to indicate the nominal size. For example, a 3/4” PTFE Filler Flange x 1/8” thick would be FFT-0.75-0.125

NOTE: Other materials available, contact factory.



    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 19 of 19 1 

Item #

Nominal Size
(inches)

PTFE Part Number

OD
(inches)

I D
(inches)

Bolt Circle (inches)

Bolt Hole Diameter (B)
(inches)

No. of Bolt Holes
1 1/2 FFT-0.5-TH 3-1/2 1-9/16 2-3/8 5/8 4
2 3/4 FFT-0.75-TH 3-7/8 1-7/8 2-3/4 5/8 4
3 1 FFT-1-TH 4-1/4 2-9/32 3-1/8 5/8 4
4 1-1/4 FFT-1.25-TH 4-5/8 2-11/16 3-1/2 5/8 4
5 1-1/2 FFT-1.5-TH 5 3-1/16 3-7/8 5/8 4
6 2 FFT-2-TH 6 3-13/16 4-3/4 3/4 4
7 2-1/2 FFT-2.5-TH 7 4-9/16 5-1/2 3/4 4
8 3 FFT-3-TH 7-1/2 5-1/8 6 3/4 4
9 4 FFT-4-TH 9 6-7/16 7-1/2 3/4 8
10 5 FFT-5-TH 10 7-7/16 8-1/2 7/8 8
11 6 FFT-6-TH 11 8-1/2 9-1/2 7/8 8
12 8 FFT-8-TH 13-1/2 10-3/4 11-3/4 7/8 8
13 10 FFT-10-TH 16 13-1/16 14-1/4 1 12
14 12 FFT-12-TH 19 15-3/4 17 1 12
15 14 FFT-14-TH 21 17 18-3/4 1-1/8 12
16 16 FFT-16-TH 23-1/2 19 1/2 21-1/4 1-1/8 16
17 18 FFT-18-TH 25 21-1/4 22-3/4 1-1/4 16
18 20 FFT-20-TH 27-1/2 23-1/2 25 1-1/4 20
19 24 FFT-24-TH 32 27-3/4 29-1/2 1-3/8 20
  Results 1 - 19 of 19 1