Micromold Products, Inc
(914)969-2850                                   Contact Us
 | 
 | 
 | 
 | 
 | 
Search Catalog
        
 Product Index    Reinforced
Product Index > Reaction and Process Vessel Accessories > Dip Pipes & Spargers – PTFE Lined & Jacketed Steel > Reinforced > View Items  

Reinforced

Check up to five results to perform an action.


DDH Series Reinforced Dip Pipes

Reinforced Dip Pipes

Part Number: As shown here, the PART NUMBER (DDH-NS-MF-L1) defines the series (first three characters), the nominal tube and connecting flange size NS, the mounting (or nozzle) flange size MF, and the insertion length L1. Use a decimal number to indicate NS. Then, replace MF with a decimal number to indicate the nominal size of the mounting flange and replace L1 with the insertion length in inches.
For example, a 1-1/2” Reducing-Flange Dip Pipe with a 6” mounting flange x 80” insertion length would be
DDH-1.5-6-80


Notes
  1. Standard flanges have ANSI Class 150 drilling. Class 300 and other sizes available.
  2. Standard tolerance on inserted length is ± 1/2”. Closer tolerances available, contact the factory.
  3. Standard distance (L2) between flange sealing faces is shown in the L2 Distance Table . To order non-standard spacing, contact the factory.
  4. Most dimensions are governed by connecting flange size as shown in the Standard Dimension Tables.
  5. Maximum standard overall length is 16 feet. For longer lengths, contact factory.
  6. For service conditions exceeding 350 F°, or 150 PSI, or vacuum service, contact factory.





    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 7 of 7 1 

Item #

Connecting Flange and
Nominal Tube Size
(inches)

PTFE Jacket OD
(OD1)
(inches)

PTFE Liner ID
(ID1)
(inches)

PTFE Seal OD
Minimum
(OD2)
(inches)

PTFE Seal OD
Minimum
(OD3)
(inches)

Inner Steel
Tube Thickness
(inches)

Outer Steel
Tube Thickness
(inches)

Minimum Distance Between
Sealing Faces (L2)
(inches)

1 1/2 2-1/4 7/16 1-1/4 See Note 4 0.109 0.200 6
2 3/4 2-1/4 5/8 1-9/16 See Note 4 0.113 0.200 6
3 1 2-3/4 3/4 1-7/8 See Note 4 0.179 0.218 6
4 1-1/2 2-3/4 1-1/8 2-11/16 See Note 4 0.200 0.218 7
5 2 3-3/4 1-5/8 3-7/16 See Note 4 0.218 0.250 7
6 3 5-1/8 2-1/2 4-5/8 See Note 4 0.250 0.337 8
7 4 6 3-1/2 5-15/16 See Note 4 0.337 0.250 9
  Results 1 - 7 of 7 1