Armored Ring Spacers

SAR Series Armored Ring Spacers

Standard Class 150 (150 lb.) Armored Ring Spacers

Base Part Number: As shown here, the BASE PART NUMBER defines the Series
(three characters), the material (one character), the nominal size, and the thickness TH. Use a decimal number to indicate the nominal size. Then, for thicknesses up to 6”, replace the TH with the decimal thickness. For thickness over 6”, contact factory. Note that the Class (or lb.) designation does not imply a pressure rating.
For example, a 3/4” Class 150 PTFE Armored Ring Spacer x 1” thick would be SART-0.75-1

Options

Locating Tabs: For optional locating tabs, add to the Base Part Number the suffix TAB.

For example, a 3/4” Class 150 PTFE Armored Ring Spacer x 1” thick would be SART-0.75-1-TAB

Class 300 (300 lb.) Spacers: For Class 300 spacers, add to the Base Part Number the suffix 300. For other classes, contact the factory. For example, a 2” Class 300 PTFE Armored Ring Spacer x 1-1/2” thick with TAB option would be SART-2-1.5-TAB-300 Steel jacket coated with dark blue, rust resistant enamel. Other colors on request.

Click here to view the Sizes of Class 150 and 300 Spacers and Flanges.