Check up to five results to perform an action.
SMF Series ISO Metric Full-Face Flanges
Standard PN Designated Flanges
Base Part Number: As shown here, the BASE PART NUMBER defines the Series (three characters), the material (one character), the DN size, the PN designation, and the thickness MM. Replace the PN in the part number with the desired PN designation. For thicknesses up to 150 millimeters, replace the MM with the thickness in millimeters. For thicknesses over 150 mm, contact factory. Note that the PN / DN designation defines the flange’s dimensions only and does not imply a pressure rating. For example, a DN 32, PN 10 PTFE Flange x 50 mm thick would be SMFT-32-10-50
1. Unless otherwise specified by the customer, the flange’s ID conforms to the ID of the comparable ISO type 01 or type 12 (slip-on) flange.
2. For other options and types of flanges, contact the factory.
Home | Products | Literature | About | Materials | Industries | OEM | Distributors | News | Terms & Conditions